Simple Primary Setup for a Commerce Copier Able to Work “Out of the Field”
KopirMT4 and KopirMT5 are commerce copiers for MT4 and MT5 platforms.
Hyperlinks on merchandise
KopirMT4 https://www.mql5.com/ru/market/product/4319?supply=Web site+Market+Product+Web page#
KopirMT5 https://www.mql5.com/ru/market/product/40574?supply=Web site+Profile+Vendor#
The only setup for copying trades.
Full Checklist of Settings
Common Settings — Common Settings
Mode – function of this occasion
Server – operates as a grasp account (sender).
Consumer – operates as a consumer (receiver).
Rule: 1 terminal — 1 copier. Don’t set up it on a number of charts; set up it on any single chart.
Checklist of server accounts – listing of accounts (comma-separated) from which trades are copied (the copier should be working in Mode=Server on these accounts).
Time Supervisor — Time Supervisor
Time supervisor use – permits operation in accordance with terminal (dealer) time.
Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday – time ranges throughout which new trades could also be opened. This setting doesn’t have an effect on closing trades—solely opening new ones. Format: HH:MM-HH:MM. You may additionally use HH-HH format and specify a number of ranges separated by commas.
HH – hours, MM – minutes.
Instance: 03:25-14:58, 21:50-02:10
Filters Offers — Commerce Filters
Filter magic listing – filters trades by magic quantity.
This technique is extremely versatile and helps particular symbols:
«-» exclusion mode: disables copying for the required magic quantity.
«*» prefix match: copies trades if the magic quantity begins with the required digits.
Examples:
-123 → copies all magic numbers besides 123.
0,123,345 → copies solely the listed magic numbers; others are ignored.
*123 → copies all magic numbers beginning with 123 (e.g., 123568, 123888, and so on.).
Manually opened orders have Magic = 0.
Filter symbols listing – filters by server instrument names.
Utilizing a logo earlier than the instrument title permits exclusion or actual matching:
«-» – prohibits copying the required instrument.
«!» – requires actual instrument title match.
Examples:
EURUSD,GBPUSD – copies solely these devices; others are ignored.
-EURUSD – copies all devices besides EURUSD.
!AM – actual match (helpful for CFDs on shares with related prefixes).
Different technique: Maintain solely desired devices in Market Watch, then restart the copier, open its settings, and click on OK.
Filter remark listing – filters by remark (or a part of it).
Prefixes allow exclusion or actual matching:
«-» – blocks copying trades containing the required remark substring.
«!» – requires actual remark match.
Examples (commerce remark: “Amresling”):
-Amre – blocks all trades with “Amre” within the remark.
!Amresling – permits solely trades with actual remark “Amresling”.
resling – copies all trades containing “resling” within the remark.
Filter minimal lot – minimal server lot allowed for copying. 0 = disabled.
Filter most lot – most server lot allowed for copying. 0 = disabled.
Cross Desk Checklist – enhances the exterior cross-mapping file. Used to remap server devices to completely different consumer devices, particularly when names differ fully.
Format: ServerInstrument1=ClientInstrument1, ServerInstrument2=ClientInstrument2
For big mappings, use exterior file kopirmt_cross.ini (situated in your terminal’s Information folder).
Instance: XAUUSD=GOLD, EURUSD=GBPCHF
Copy mode – copy course: Lengthy solely, Brief solely, Lengthy & Brief, Copy new off.
Default: Lengthy & Brief.
“Copy new off” disables copying new trades however continues managing current ones.
Copy restrict orders – permits copying of restrict orders.
Copy cease orders – permits copying of cease orders.
MM Settings — Cash Administration Settings
Use steadiness – permits lot calculation based mostly on Consumer Steadiness / Server Steadiness ratio.
Use forex – prompts lot recalculation contemplating deposit forex. Requires related conversion pair in Market Watch (e.g., USDRUB for RUB accounts, EURUSD for EUR/USD accounts, AUDUSD for AUD accounts).
Use leverage – permits lot adjustment based mostly on Consumer Leverage / Server Leverage ratio.
Use lot multiplicator – lot multiplier. 1 = 100% of server lot. Use 2 to double, 0.5 to halve. All coefficients are utilized cumulatively.
Use repair lot – if enabled (set Use lot multiplicator = 0), overrides all different multipliers with a hard and fast lot dimension.
Minimal lot for open (consumer) – if calculated lot is under this worth, use this lot as a substitute. 0 = disabled.
Maximal lot for open (consumer) – if calculated lot exceeds this worth, use this lot as a substitute. 0 = disabled.
Cease by fairness – fairness threshold (e.g., 500) under which new trades usually are not copied till fairness rises above it.
Cease by margin stage % – free margin proportion threshold under which copying stops. Resumes when margin stage rises above it.
Cease by drawdown % – whole drawdown proportion threshold that halts copying. Resumes when drawdown decreases.
Shut all orders – forcibly closes all open trades if Cease by fairness or Cease by margin stage % circumstances are triggered.
Alert mail use, Alert push use – ship low fairness/margin alerts through e-mail or cell push. Alerts are despatched not more than as soon as each 10 minutes. Terminal notification settings should be configured accordingly.
Copying Trades Settings — Commerce Copying Settings
Timeout – time window (minutes) to repeat a market order after it opens on the server. 0 = no timeout (waits indefinitely whereas the commerce stays open on server). Doesn’t have an effect on closing.
Timeout for pending orders – time window (minutes) to repeat pending/restrict orders. 0 = copies instantly. Doesn’t have an effect on closing.
Pause for open subsequent order (sec) – delay (seconds) between opening consecutive orders.
Slippage is unfold – calculates entry tolerance as a ramification multiplier. If disabled, makes use of factors.
Filter slippage – entry tolerance as unfold multiplier or in factors.
Reopen place – reopens a commerce at a value near the unique if it was manually closed on the consumer.
Reopen most – most variety of allowed reopens per commerce.
Scalper mode – enters solely at actual or higher value. Might skip trades if value doesn’t return to entry stage. Not appropriate for averaging methods.
Reverse mode – reverses commerce course (e.g., Server BUY → Consumer SELL).
Factors – revenue/loss threshold (in normal factors) triggering commerce copy. Instance: -5 → copies when server commerce reaches -5 factors.
No shut orders on consumer – prevents closing consumer trades after they shut on the server. Partial closing is routinely disabled on this mode.
Rely server order for copy begin – begins copying solely after a specified variety of server orders are open (e.g., begins copying from the fifth order onward).
Auto remark – routinely replaces commerce feedback with server account quantity and copied commerce ID.
Person remark – customized remark for all trades. Enter an area (” “) to take away feedback.
Copy stoploss use – permits StopLoss copying.
Copy takeprofit use – permits TakeProfit copying.
Person can modify orders – permits guide or EA modification of SL/TP on consumer trades (required if one other EA will handle them). Disables all SL/TP modifications outlined under this selection.
Stoploss Shift (+/- Factors) – adjusts copied StopLoss by specified factors (+ will increase, – decreases).
Takeprofit Shift (+/- Factors) – adjusts copied TakeProfit by specified factors (+ will increase, – decreases).
Person takeprofit use – units a hard and fast TakeProfit for all trades.
Person take at factors – TakeProfit worth in normal factors.
Person stoploss use – units a hard and fast StopLoss for all trades.
Person cease at factors – StopLoss worth in normal factors.
Trailing Settings — Commerce Administration Settings
Fairness Tral Begin (%) – prompts trailing cease when revenue reaches this proportion. Closes all chosen group trades if revenue drops under trailing step.
Fairness Tral Step (%) – trailing cease step in proportion.
Trailing All Servers Use – trails all consumer trades collectively or per server individually.
Trailing Cease Factors – traditional trailing cease (min 1 level).
Trailing Step Factors – trailing step (min 1 level).
BU Begin Factors – strikes commerce to breakeven after reaching specified revenue (normal factors).
BU Minimal Revenue Factors – minimal revenue (normal factors) required when transferring to breakeven.
FAQ — Ceaselessly Requested Questions
How a lot does it value, and the place can I purchase it?
That is the official retailer. We advocate buying right here to make sure entry to help and updates.
How do I set up the product within the terminal?
Observe the final set up directions offered after buy. Then configure fundamental settings utilizing the video information and check performance.
Are updates free?
Sure. All updates for merchandise bought listed below are free and accessible in your Order historical past. E-mail notifications are despatched for brand spanking new variations.
Do I want to purchase a license for every account?
You’ll be able to select both Account-bound license or Gadget (VPS) license.
VPS license permits limitless terminals (sometimes 6–10 per normal VPS).
Account license applies solely to consumer accounts.
Word: All the time match MT4/MT5 model to your slave accounts. Model swaps usually are not supported.
Can I purchase instantly from you?
Sure—that is the official retailer. Buying elsewhere dangers dropping entry to help and updates.
Easy methods to copy between MT4 and MT5?
You want each KopirMT4 and KopirMT5. Performance is similar.
A trial model can function the server.
Limitation: MT4 can not ship/obtain trades to/from MT5 Netting accounts. MT5-to-MT5 helps all account sorts.
The place is the Grasp or Consumer file?
Each modes are in a single file. Set Mode=Server or Mode=Consumer in settings.
What’s the copying velocity?
Pace relies on your dealer, not the copier.
The copier detects trades immediately (<50ms delay), however dealer execution could lag.
Verify Terminal Journal for timestamp distinction between order submission and execution.
Check with the 7-day free trial.
Does it work throughout completely different brokers? Can I copy from demo to actual?
Sure—it’s designed for multi-broker and demo-to-real copying.
Totally different instrument names are dealt with routinely or through kopirmt_cross.ini.
Demo accounts typically execute quicker than actual accounts—check with the trial model.
Can I attempt it on an actual or demo account?
Sure—the trial model works on any account with full performance for 7 days.
What performance is accessible?
Years of growth allow almost any copying scheme. See full settings listing on our web site.
Does the copier work over the web?
No—it runs solely on the native machine the place put in.
To repeat remotely: set up a separate terminal with Grasp account (investor password advisable) on the distant PC/VPS to feed information to purchasers.
Can I open trades from my PC/smartphone whereas copying runs on VPS?
Sure—set up all terminals on VPS and commerce from any distant system utilizing the Grasp terminal.
Can I exploit the copier with different EAs?
Sure—it coexists with different EAs on Grasp and Consumer accounts with out interfering with their trades.
Set up the copier on a separate chart.
Check with the trial model if uncertain.
Trades aren’t copying or different points happen?
Widespread points have recognized options. Contact the developer for help.
Totally different instrument names throughout brokers— configure?
If names differ solely by prefix (e.g., EURUSD.fx), clear up Market Watch (take away non-trading symbols) and restart the copier.
For fully completely different names (e.g., NASDAQ vs. NAQ100), edit kopirmt_cross.ini on the consumer:
– MT5: MQL5Fileskopirmt_cross.ini
– MT4: MQL4Fileskopirmt_cross.ini
Add mapping strains (no areas round “=”; match case precisely):
XAUUSD=GOLD
XAGUSD=SILVER
USDRUB=USDRUR
NASDAQ=NAQ100
Restart terminal or reload the copier after adjustments.
Word: If devices are mapped through Cross Desk, pending orders gained’t copy—solely market execution triggers copying.
I discovered model 3.xx, 4.xx, or Lite on-line—it doesn’t work. What ought to I do?
We don’t help pirated variations. They could include errors risking your funds.
Our official model is reasonably priced and contains developer help and well timed fixes.
Respect builders—keep away from piracy.
I purchased your copier way back— get the most recent model?
Obtain the trial model and phone us together with your buy particulars. After verification, we’ll activate it on your account or present a reduction coupon.
Is your copier higher than free alternate options on-line?
Free variations typically lack help, updates, and reliability. Many are deserted or buggy.
We rigorously check each replace and supply free help to consumers.
Trades are duplicated (2+ similar orders)?
Use just one chart per terminal for the copier—take away further situations on each Grasp and Consumer.
Copier isn’t copying trades—what to do?
1. Apply fundamental settings per directions.
2. Guarantee AutoTrading is ON, DLL imports and buying and selling permissions are granted (MT4 requires DLL).
3. Affirm your dealer permits EA buying and selling.
4. Verify Consultants Journal for error messages.
5. Confirm all required devices are in Market Watch; add lacking ones and restart terminal.
6. If unresolved, contact help through My Account → Assist.
Easy methods to disable or change auto-comment?
On the Consumer, regulate these settings:
Auto remark = false → disables auto-comments.
Person remark = ” “ → removes all feedback (use an area).
